- Gasket-products.com ›
- Produkter ›
- Tætningsmasser ›
- Flydende pakning › 94047977
Elring DIRKO HT. oxim (315 C) liquid gasket kit, Black, silicone compound, profipress 200 ml
- Sikker forbindelse
- Hurtig levering
- Gratis levering fra 745,30 kr
- Personlig service
- Tilfredse kunder
Beskrivelse
ELRING Dirko™ HT oxime profipress (neutral curing) is a highquality, high
temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties. It provides excellent adhesion on all
standard metals, cast iron, plastics (except for PE, PP
and PTFE) and glass. Due to a reaction with humidity
in the air Dirko™ HT oxime cures to form silicone. The
product can be used for a very wide range of applications.
Resistant to:
Mineral oils (including additives), synthetic oils,
lubricating grease, coolants, UV radiation, cold and
hot water, salt water, cleaning agents, weak acids
and alkalis
Possible applications:
Valve cover, oil pan, water and oil pump, differential housing, gearbox, gear oil sump, thermostat
housing, control housing, axle cover, flange connection, headlights, rear light, battery compartment
Skin formation time (23°C, 50\% relative humidity)
5 - 10 min (DIN EN ISO 291)
Curing time (23°C, 50\% relative humidity)
Approx. 4.5 mm / 24 h (DIN EN ISO 291)
In 200 ml profipress Compressed gas cartridge.
temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties. It provides excellent adhesion on all
standard metals, cast iron, plastics (except for PE, PP
and PTFE) and glass. Due to a reaction with humidity
in the air Dirko™ HT oxime cures to form silicone. The
product can be used for a very wide range of applications.
Resistant to:
Mineral oils (including additives), synthetic oils,
lubricating grease, coolants, UV radiation, cold and
hot water, salt water, cleaning agents, weak acids
and alkalis
Possible applications:
Valve cover, oil pan, water and oil pump, differential housing, gearbox, gear oil sump, thermostat
housing, control housing, axle cover, flange connection, headlights, rear light, battery compartment
Skin formation time (23°C, 50\% relative humidity)
5 - 10 min (DIN EN ISO 291)
Curing time (23°C, 50\% relative humidity)
Approx. 4.5 mm / 24 h (DIN EN ISO 291)
In 200 ml profipress Compressed gas cartridge.
Specifikationer
Colour | Black |
Oil resistant | Yes |
Max temp (°C) | +315 °C (24u) |
Max temp (°C) cont. | -60 tot +285 |
Chemical basis | Oxime silicone |
Components | Single component |
Max sealing gap | 2,0 mm |
Hardness | 40 ± 5 |
Density (g/ml) | 1,18 ± 0,2 |
volume | 200 ml |
Curing | Room temperature vulcanised (RTV) |
Consistency | Pasty, stable, permanently resilient when cured |
pH value | Neutral |
Electrical conductivity | Insulating |
Elastic modulus 100\% | 1.0 ± 0.2 N/mm2 |
Tensile strength | 3,3 ± 0,2 N / mm² |
Elongation at break | 400 ± 100 \% |
Yderligere produktinformation
Vi sender din ordre med PostNL. Følgende gælder: bestilt mandag til fredag inden kl. 17 afsendes samme dag. Vi tilbyder forskellige forsendelsesmuligheder. Du kan vælge en af mulighederne under kassen.
Se forsendelsesomkostningerne for
Forsendelse til Holland (NL)
Fragtmetode | Ordrebeløb under 745,30 kr | Ordrebeløb over 745,30 kr |
Letterbox-pakke+ med Track & Trace | 44,39 kr | Ingen forsendelsesomkostninger! |
Pakke med Track & Trace | 51,79 kr | 7,40 kr |
Pakke med Track & Trace, kun angivet adresse | 55,90 kr | 11,50 kr |
Pakke med Track & Trace, kun angivet adresse + signatur | 59,28 kr | 14,89 kr |
Levering til et PostNL-pakkepunkt | 51,79 kr | 7,40 kr |
Store Pickup in Alphen aan den Rijn (NL)
Fragtmetode | |
Store Pickup in Alphen aan den Rijn | Ingen forsendelsesomkostninger! |
There are currently no product reviews.
Vær den første til at bedømme dette produkt
RELATED PRODUCTS
96,55 kr
133,36 kr
29,14 kr
Kun online, så meget konkurrencedygtige priser
Om Gasket-products.com
Hjemmesiden (Gasket-products.com) er et datterselskab af Parts United Marine & Offshore.
Min konto
Kontakt
Telefonnummer:
+31 (0)88 122 2075E-mailadresse:
info@gasket-products.comBesøgsadresse:
Hoorn 159
2404HH, Alphen aan den Rijn
Nederland
KvK nummer: 76933415
Momsnummer: NL86.08.45.114 B01
Copyright © 2024 Gasket-products.com - Alle rettigheder forbeholdes.
×
Moms og forsendelsesomkostninger
I øjeblikket vises momssatser og forsendelsesomkostninger for NL, for at udveksle vælg det rigtige land nedenfor: